|
By using state-of-the-art technology and high-precision processes, we will test for you printed circuit boards and hybrids.
Whether it is a one or two sided board , a double-sided SMD board, an inner layer or high
density, fine pitch board – our equipment guarantees reliable and efficient testing
throughout. Even in small volumes.
When every minute counts we will ensure your printed circuit boards have been reliably
tested and returned to you in less than 24 hours. If necessary, we will even conduct
tests overnight. And it goes without saying, if you need to cut costs and shipping
times, we will deliver tested boards directly to your customers.
Testparameters for bare board test
Standard parameters:
| fixture test | flying probe test |
| Test voltage: | 200 V | 10 V (500V) |
| Test current: | 1 W | |
| |
| Isolation test: | 10 MOhm | 10 MOhm |
| Continuity test: | 30 Ohm | 30 Ohm |
Parameter ranges:
| fixture test | flying probe test |
| Test voltage: | 0-250 V | 10 V (500V selective) |
| Power: | 1 W | (3mA-30mA) |
| |
| Isolation test: | 100 kOhm - 100 MOhm | 100 kOhm - 10 MOhm |
| Continuity test: | 1 Ohm - 100 Ohm | 1 Ohm - 2 kOhm |
High voltage test:
Selective test up to 500 V
Resistance test:
| 10 Ohm to 100 Ohm | Tolerance: +-1 Ohm |
| 100 Ohm to 100 kOhm | Tolerance: +-3% |
| 10k kOhm to 1 MOhm | Tolerance: +-5% |
LEITEC - Test Sizes
Flying Probe Test:
| Single Sided: | 620mm x 600mm |
| Double Sided: | 620mm x 600mm |
Manual Test for Standard Boards:
| Single Sided: | 650mm x 406mm |
| Double Sided | 650mm x 406mm |
Manual Test for High Density Boards:
| Single Sided: | 487mm x 416mm |
| Double Sided | 487mm x 416mm |
Automatical Test for Standard Boards:
| Single Sided: | 488mm x 325mm |
| Double Sided | 488mm x 325mm |
Automatical Test for High Density Boards:
| Single Sided: | 406mm x 325mm |
| Double Sided | 406mm x 325mm |
|
|
